Betaflight 3.1.0 Revo F4 Flight Controller Integrated Compatible Flysky AFHDS 2A Receiver 20x20mm Built-in 5V BEC

Buy this awesome micro flight controller for £22 

Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC

Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC
Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC
Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC
Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC
Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC
Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC
Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC
Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC
Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC
Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC
Betaflight 3.1.0 F4 Flight Controller Integrated Compatible Flysky Receiver 20x20mm Built-in 5V BEC

Description:

Item name: F4 FC Integrated Flysky Receiver

Size: 27x27mm
Mounting hole: 20x20mm, φ2.5mm
Weight: 3g
Firmware: betaflight_3.1.0_REVO
Input voltage: 2-4S
Master control: STM32F405RGT6
Sensor: MPU6000
Connector: LED_STRIP
Buzzer port: with
Blackbox: 128Mb Flash(16M Byte)
BEC: Built-in 5V 1A BEC
OSD function: no
Integrated Flysky AFHDS 2A protocol receiver, IBUS signal.
Supports Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 ESCs.

Binding method:

1. Press the BIND key on the receiver and connect it to the power supply. The green indicator LED on the receiver is quick flashing to enter binding state.
2. Set the remote control under binding state, the quick flashing indicator LED on the receiver will change to slow flash.
3. Set the remote control beside binding interface and the indicator LED on the receiver will light steady, this manifests the signal receive successfully.

Package included:

1 x F4 FC Integrated Flysky Receiver