Lantian X143 143mm Carbon Fiber Frame

I bought a Lantian X143 carbon fibre frame from banggood  during a recent sale so here is my build log.

The Lantian X143 frame is really nice but super tiny and mine didnt seem to have any mounting holes for my flight controller etc, but, seeing as i was using a diatone mini f3 flight controller that has 27mm mounting holes i ended up drilling my own holes and 3d printing m2 standoffs (the diatone f3 mini uses m2 bolts for mounting).

Next problem i had 3 working ESCs and 2 that had met their maker after a nasty crash…. So after some delicate desoldering of the 3 working surface mount components from one ESC and soldering them onto the other  we have 4 working ESCs (see pictures – component being soldered is the little black cube at the end of the tweezers)

After this was done it went together fairly well but was a little fiddly just because of its tiny size!

I havent put any fpv gear in this yet but will probably end up mounting an all in one cam/vtx probably in a 3d printed mount.

Anyway here are some pictures and my parts list…

Part List For Lantian X143 Quadcopter…


The Frame i ordered is no longer stocked by banggood but this is a very nice looking alternative…

Realacc K130 K200 130mm 200mm 4mm Arm Carbon Fiber Frame Kit with PDB Board


Flight Controller


Diatone D-Link F3 Mini Flight Controller MPU6050 Integrate PDB 27x27mm For RC Multirotor

Use the code bigsale for %20 off this item!




Kingkong BLHeli 6A OPTO 2S 3S Mini ESC Electronic Speed Controller




Racerstar Racing Edition RS Series 1806 RS1806 2300KV 2-3S Brushless Motor

Use the code bigsale for %20 off these motors!




2 Pair DAL 4×4.5 4045 4 Inch Propeller CW CCW for QAV180 Orange Red White Green Black




Flysky FS-A8S FS A8S 2.4G 8CH Mini Receiver with PPM i-BUS SBUS Output




ZOP Power 11.1V 1000mAh 3S 30C Lipo Battery JST Plug


Total Cost